|
|
|
| Attwood Hubmate Wheel Bearing Protectors and Covers |
|
Bearing protectors replace dust cap in the wheel hub. The accessible grease fitting allows you to add grease without disassembling. Positive grease pressure keeps water and dirt out. Automatically lubricates, reducing wear and prolonging bearing life. Boating and Sailing Accessories
|
|
$13.00 - $13.00
from 1 store
|
|
| Slipper Spring Hanger Kit for 1 - 3/4 |
|
Bolt-on front and rear spring hangers for 1 3/4'' slipper springs. Hot dipped galvanized. Includes 1/2'' x 3'' shackle bolts with nylon locknuts. Every thing you need to complete the job. Sh.Wt.5lbs
|
|
$23.00 - $23.00
from 3 stores
|
|
| Attwood Bilge Pump 500 G.P.H. |
|
This Attwood(r) bilge pump pumps bilge water level down to 3/8 in. Base and mounting bracket have molded-in mounting holes for #8 screws. It offers 450 gallons-per-hr output at open flow and 310 gallons-per-hr output at 3-ft head.
|
|
$13.00 - $18.00
from 3 stores
|
|
| V750 Bilge Pump 750 G.P.H. |
|
Draws only 2.8 amps at open flow, pumps water level down to 3/8'' and provides powerful pumping without compromising battery life. Pumps 760 gallons per hour. Designed for boats 20-24' in length. pumps - bilge
|
|
$21.00 - $29.00
from 1 store
|
|
| Wheel Bearing Protectors - for 2.32'' Bearings |
|
Fulton's bearing protectors make it easy to keep your bearings packed full of grease. Spring loaded for proper operating pressure. Requires no special tools to install. Packaged in two. Includes two Bra's to keep the grease fitting free of dirt.
|
|
$15.00 - $24.00
from 3 stores
|
|
| Stainless Steel Bearing Protectors - Fits 1.98" Hubs |
|
Stainless steel bearing protectors come with a lifetime warranty. Makes it easy to keep your bearings packed full of grease. Spring loaded to maintain proper operating pressure. Packed 2 per kit with covers. Fits 1.98" hubs. Sold in pairs. Incl. 2 bras.
|
|
$26.00 - $26.00
from 3 stores
|
|
| Wheel Bearing Protectors |
|
Provides permanent protection against damage from water and dirt entering the wheel bearings. Installs quickly and fits tightly into the hubs. Made of chrome plated steel.
|
|
$2.00 - $23.00
from 3 stores
|
|
| Mercruiser Martyr Anode Bearing Carrier for Alpha1 |
|
Boater's World is your Sacrificial Anode Center. We want to make sure engine troubles don't keep you from having fun on the water! No matter where you choose to do your boating, we have all the right products to help take care of your boat. Read this quick overview on how to protect you engine from ...
More
|
|
$17.00 - $18.00
from 3 stores
|
|
| Trailer Buddy Bearing Buddy Ii |
|
Provides permanent protection, constant lubrication, keeps water and dirt out of hubs, lubricant level can be checked quickly. Automatic pressure control prevents overfilling, avoids hub seal damage. Fits hubs 1.98" opening.
|
|
$20.00 - $21.00
from 2 stores
|
|
| Stainless Single Connector |
|
Smooth spinning, ball bearing, heavy-duty 360 degree swivel is made of high strength polished 316 stainless steel with an open race for lubrication. Solid cross pins allow easy assembly under adverse conditions. Load rated.
|
|
$15.00 - $15.00
from 2 stores
|
|
| Stainless Double Connector |
|
Smooth spinning, ball bearing, heavy-duty 360 degree swivel is made of high strength polished 316 stainless steel with an open race for lubrication. Solid cross pins allow easy assembly under adverse conditions. Load rated.
|
|
$20.00 - $20.00
from 2 stores
|
|
| Swivel Assorted Ring 1 Doz |
|
Sampo ball bearing swivels work better than other, offering you maximum protection against twisted and tangled lines ... an absolute must for trolling, big game fishing and spin fishing. The high-polished stainless steel ball bearings roll with ease. Tapered raceways reduce frictions where other bra ...
More
|
|
$22.00 - $22.00
from 2 stores
|
|
| Tie Down Bearing Kits |
|
BEARING KITSPrecision tapered roller bearings. Each kit includes 2 cones, 2 cups, seal, cotter pin and dust cap (where noted). Made in USA.
|
|
$11.00 - $11.00
from 1 store
|
|
| T. H. Marine Pontoon Gate Latch Unit |
|
Entire unit installs on gate only. Molded nylon for strength, no rattle. Operates on right or left hinged gates. Fits 1", 1-1/8" and 1-1/4" square tubing. Note: Not designed as a safety or lead bearing device.
|
|
$11.00 - $12.00
from 1 store
|
|
| 11350 Lithium Grease |
|
Temperature range -10 to 265 degrees F - Extreme pressure and water properties - For use where dark staining is not wanted - Water insoluable - Contains refined virgin oils - For auto, marine, agriculture & industrial use - For grease lubricated bearings - NLGI grade 2 and softer
|
|
$23.00 - $63.00
from 1 store
|
|
| Trailer Wheel Bearing Kits |
|
Replacement wheel bearing kits for trailer hubs including bearings, cups, seal and cotter pin. Made for the marine environment. Sh.Wt.2lbs Bearings & Hubs
|
|
$15.00 - $15.00
from 2 stores
|
|
